If you are a regular user of Windows 10 computers, then you must have confronted the problem with wireless adapter or access point in Windows 10 at some point of time while accessing the internet. And needless to say, such an issue is definitely quite annoying. Windows 10 adapters create a problem for you in case you have not configured them appropriately.
If you are not thorough with the technological know-how, such an unexpected error is most likely to baffle you. However, you can shed away your doubts now. As in this article, we shall offer you feasible workarounds for your problem with wireless adapter or access point on your Windows 10 PC.
For you to curb any problem from its root, it is essential that you acquaint yourself with detailed knowledge about the potential causes behind the issue in question. Therefore before moving on to the feasible solutions for your glitch, let us first shed light on some of the causative factors responsible for the problem with wireless adapter or access point. Below we list some of the major causes. Take a look.
The issue under question triggers mainly due to some wireless hardware devices such as deactivated WiFi adapter, a loosely set WiFi adaptor port, disabled hotkeys and many more.
This error might also occur due to corrupted, incompatible, outdated or defective wireless network drivers. Such faulty network drivers can restrict the WiFi connection.
Another potential factor which can cause the problem with wireless adapter or access point in Windows 10 is wrong or improper WiFi configuration. Therefore, in case you confront the error in question, you should instantly scrutinize your Windows 10 WiFi settings and ensure whether it is properly configured or not.
Mentioned above are some of the major causes behind the occurrence of the problem with wireless adapter or access point in Windows 10. And now that we have discussed in detail the causative factors behind the issue, let us look into the feasible solutions which will help you combat the error.
This glitch normally triggers on some specific models of laptops. Nonetheless, this should not come to you as a surprise. For laptops mostly use wireless networks. Thus most laptop models are susceptible to this particular issue. However, in case you are facing this issue and do not know how to fix the problem with wireless adapter or access point, your worries are over now. As, in this section of the article, we shall provide you with suitable guidelines to fix the access point error. Therefore, continue reading through our guidelines:
In case you are confronting the Windows 10 access point error time and again, then switching over to a wired connection would be the most effective workaround for you. In order to do this, however, you must secure the connection of your laptop with your router device by means of an ethernet cable. If your problem is being solely generated because of your WiFi connection, then your problem must be sorted. However, even after using the wired connection, if the problem still persists, then you need to move on to the next solution that we have in store for you.
The problem under discussion mostly triggers if your WiFi configuration is found corrupt. Essentially speaking that corrupted configuration causes not only the problem with wireless adapter or access point in Windows 10 but also triggers many other issues. And thus, such a problem needs to be fixed at the earliest. And on this note, one of the easiest fixes for you is to remove your wireless profile permanently. In order to execute this, follow the steps mentioned hereunder.
First and foremost, launch the Command Prompt as an Administrator. In order to do this, you must press the Windows key and X simultaneously from your keyboard. The moment you do this, it will launch the “Power User Menu.” Next, chose the Command Prompt as an admin.
After you have successfully initialized the Command Prompt, you need to type netsh wlan delete profile name= ”Wireless Profile Name” and click the Enter button thereafter. Make sure that you have replaced ”Wireless Profile Name” with your original wireless connection name. That’s it! After the completion of the above steps, you will simply have to reconnect and configure your network once again.
One of the major causes of the problem under discussion is outdated drivers. And you can easily fix this issue by simply updating your drivers. And doing this is not at all a difficult task. All you need to do is reach out to the official website of your network adapter manufacturer. You need to simply search out for your device and download the latest version of your driver.
However, if the process seems too difficult for you, you can download the latest versions of your drivers by means of an alternative methodology. That is to say, you can download the latest drivers by means of a CD. You normally get hold of a CD along with the wireless adapter. Installation of the drivers directly from a CD is indeed one of the most effective solutions for you.
This is because the process of manually downloading the latest versions of can indeed be time-consuming and risky. However, if you wish to avoid such risks, you can consider making use of some software in this regard.
Securing your WiFi connection by means of a strong and correct password is essential in order to avoid such problems. Nonetheless, oftentimes we make the mistake of putting in incorrect passwords at the time of connecting to the WiFi network. However, every problem has a counter solution to it. Therefore, you need not to panic in case you have put in a wrong password by mistake. In order to resolve the problem, all you need to do is deactivate your WiFi network connection and then reconnecting it all over again. However, when you reconnect, make sure you have put in the appropriate password this time.
On this light, it is important for you to note that some users have expressed concerns that at times, the keyboard gives you trouble. That is, your keyboard might automatically include different characters. This especially happens when you tend to apply various input languages on your computer system. Hence, when you put in your passcode, please make sure that you have checked your password twice.
Besides these, you may also try out some other additional strategies in case the ones mentioned above did not work.
Many users have reported that one of the easiest fixes for the problem with wireless adapter or access point in Windows 10 is to launch some specific commands from the Command Prompt. To execute the process, adhere to the instructions mentioned below.
First and foremost, you need to launch the Command Prompt. Once you have launched it, you need to type the following commands and hit Enter after each.
And once you have successfully executed all the commands, you will have to shut down the Command Prompt. That’s it, your problem should be fixed. If not, move on to the next alternative solution.
Certain antivirus software, despite being essential for online security, can prove detrimental for your wireless connection. This is primarily because some of the antivirus software might intervene with the functioning of your WIFi network. In order to troubleshoot the glitch, you must either remove or deactivate all the third party antivirus programs causing the error from your system. You can reinstall them if you wish after the issue is resolved.
At times, the problem with wireless adapter or access point in Windows 10 may occur if your wireless network has been disconnected after the initial installation of some of the third party software. Therefore, if this problem triggers, first check whether you have enabled your wireless adapter. However, if it is disabled, then you can fix the issue following the under mentioned steps:
To begin with, you must click on the Windows key + X simultaneously and then choose Device Manager from the options list. As soon as you click on the Device Manager, it will open up in an instant. The moment it opens, you got to trace out your wireless adapter. When you find it, double-click on the Properties to open it. Lastly, you must reach out to the Driver tab and then search out for Enable Button. And in case you fail to locate the Enable button, relax. This means that your Adapter is enabled and functioning perfectly.
This is by far the simplest of all solutions. If none of the solutions mentioned above works and you are still wondering how to fix the problem with wireless adapter or access point, then this is the least you can do. You simply have to change the current name and password of your wireless connection and your problem will be solved
Ending Comments
If you are facing any problem with wireless adapter or access point in Windows 10, there is no need for you to get panic stricken from now on. Neither is it advisable for you to leave the problem unattended for long. All you must do instead is follow our guidelines and try to sort out the issue by yourself. We guarantee you that the solutions are tested and hence are extremely effective and will serve your purpose.