Some Effective Hacks to Solve Apple TV Error 3905

Apple TV error 3905 generally comes up when the TV is unable to connect with the internet. This particular error permanently blocks the WiFi connectivity feature of the Apple TV and stop all the services that require the internet. Most of the users also confront it with an error message saying ‘There was a problem connecting to the network’.

If you are a new Apple TV user and facing this problem for the first time, then it might be difficult for you to resolve the issue. But no need to panic because we are here to share the fixes of Apple TV Error 3905 with you. So, go through the rest of the article to fix the issue and start enjoying your Apple TV service again.

Potential Reasons for the Apple TV Network Error 3905

Apple error code 3905 can be caused by various kinds of device and connection-related issues. Some of them are:

  • Apple TV is unable to join the network.
  • Due to the intermittent connection problem.
  • The WiFi network is unstable.

Simple Tips and Tricks to Solve Apple TV Error 3905

If you have a clear idea of why the problem is occuring in your device, then choose the appropriate method from the below guide to fix it. But if you don’t have a clue, then we will recommend you to go through all the methods one by one to find an effective solution for the problem.

Method 1: Check Wireless Security

Most of the times, Apple TV fails to build a connection with the router due to the WiFi security issue. So, in this case, you have two options. One is changing the WEP security and another one is, disabling the Wireless Encryption.

Change WEP Security

If you choose to modify the WEP security, then consider changing current Security mode to WPA or WPA2 instead. Here is the whole process:

  • Open the Command Prompt from your desktop and type ipconfig.
  • From the new window, see the information beside the Default Gateway. The information next to the Default Gateway is your Router’s IP address, which you need to access the router settings page.
  • Now, use any browser from your computer or mobile and enter the router’s IP address.
  • Once you land to the router settings page, log in to it by providing a username and password. If this your first time entering the settings page, then use default username “admin” and the default password “admin” or “password”.
  • Now, locate the Wireless Setup option from the Systems tab and click on it.
  • After opening the Wireless setup option, select the Security Mode to select WPA or WPA2 from the drop-down menu and provide network key to confirm the changes.

[Note: The steps may vary from router to router. So, you can use your router’s user manual to change the WEP security]

Disable Wireless Encryption

Most of Apple TV WiFi errors like 3905 or 3909 are caused by encrypted networks. It can be easily fixed when you temporarily turn off the Wireless Encryption. So, if you also want to use this trick to solve the problem, then open the Security option in the same way you have done in the previous method. Modify Wireless Encryption status to None and apply the changes. After applying the method, try to access the WiFi connection from your Apple TV.

Method 2: Check the MAC Address Filtering

If you are using MAC filtering as a layer of security in your router and forget to add the MAC address of the Apple TV in your router’s list, then it will result in error 3905. To solve this problem, navigate to the Settings page of the Apple TV and select the General section. Next, open the About option and note down the Apple TV address. After doing so, log in to your router with the above-mentioned process and add your Apple TV address in the Access Control List of the router.

Method 3: Update the Apple TV’s Software

If the above methods failed to solve Apple TV problem connecting to network 3905, then you can try to update the Apple TV’s software. It is possible you didn’t update the software for a long time which causing interruption during accessing the internet. So, performing a quick update can easily solve the problem. Here, is the guide to update the software:

  • At first, connect your Apple TV with the router via an Ethernet cable.
  • Now, from the main menu of your Apple TV  go to Settings section.
  • Then, select the “General” tab, and choose “Update Software” option to check for the latest software for the TV.
  • If your system finds the latest software to install, then simply click on the Update Now button to download and install it on your TV.

After completing the following process, disconnect the Apple TV from the wireless router’s Ethernet port, and then try connecting to the Wi-Fi network again.

If you are unable to find any latest software update for your TV, then you can also try updating your router’s Firmware to solve the problem.

Method 4: Restart the Apple TV

In order to fix the Apple TV error 3905, you can also try restarting your Apple TV. To perform the action, you can follow the steps as described here:

  • On your Apple TV, go to “Settings”.
  • After that, head to the General tab and then choose the Restart option.
  • Once your Apple TV is back on, then you can check your Wi-Fi connection.

We hope these methods will solve the Apple TV network error 3905. If you have some other methods to fix the problem, then you can also share those with us. By any chance, if you still facing error 3905 problems after following our guide, then we will highly recommend you to get in touch with an expert for better guidance.

Frequently Asked Questions

  • How do I reset my Apple TV network settings?

Open the Settings from your TV and select the System option. After that, select Restart from the given options to start rebooting your device (Applicable only for Apple TV  2nd or 3rd generation and 4th generation). Also, make sure to disconnect with the internet during the process by unplugging the router or DSL modem from the power source.

  • How do I fix Apple TV WiFi

At first, before trying anything else, make sure your Wi-Fi network is working. If you find it working without an issue, then try these things to fix the Apple TV WiFi problem:

    • Update your router and Apple TV related equipment
    • Restart your Apple TV and router
    • Try to connect with the router with the help of Ethernet cable
    • Check security settings and protocol of your router and Apple TV.
  • How do I know if my Apple TV is connected to the Internet?

To check if your Apple TV is connected with the internet or not, open the Apple TV main menu. After that, go to the Settings icon and open the General option. From the new window, click on the Network tab to select Open Test Network option. Now, just click on OK when a confirmation notification pops up to start the network status checking procedure.

  • How does Apple TV connect to the Internet?

When you set the default language of your Apple TV, your device will automatically prompt you to connect with a wireless network. (Note: If you are connected with an ethernet cable then you will not be asked to connect with a wireless network). Next, use the Apple TV remote to navigate the on-screen keyboard and select the wireless network you want to connect. Now, just put your WiFi password to connect your Apple TV with the Internet.

  • Does Apple TV work better with Ethernet?

The Apple TV comes with 802.11 N wireless WLAN communication which means it has the ability to support high-speed WiFi connection. But when multiple devices are connected with the same router, you will not be able to get the usual network speed during the High-quality HD video streaming. To eliminate the dependency on WiFi connection Apple TV also come with 10/100BASE-T Ethernet to provide better speed than a WiFi connection. So yes, Ethernet connection does work better with Apple TV.