Here’s What You Should Do If Your Windows 10 OS Can’t Connect To This Network

Windows 10 OS Can’t Connect To This Network is one of the most frequently faced and reported by the Windows 10 users. As we all know the Windows 10 Operating System is modeled with the most advanced and top-notch features. However, that barely takes away from it, its glitches and follies. And among the glitches, the one that is most common and indeed the most frustrating is the error in question.

Windows 10 cannot connect to this network, essentially triggers when you fail to establish a proper internet connection with your  Windows 10 OS. Now such an error is definitely quite annoying for any user, given the need and importance of stable internet connectivity in one’s Personal Computer.

However, since this is one of the most common errors of Windows 10 OS, it is quite likely for you to confront the glitch every now and then. Nonetheless, even if it is so, you don’t need to get panic-stricken. As the error is quite easily fixable. And, in this article, we shall attempt to offer you the premium solutions for your problem. Therefore, drive your worries away and read through  our article thoroughly

Potential Causes Why the Windows10 OS Can’t Connect To This Network

Essentially speaking, if your Windows 10 OS Can’t Connect To This Network, there must be some reasons behind it. And when talking about the potential causes leading to the occurrence of the technical hitch under question, internet connectivity issue accounts for the foremost causative factor responsible for the problem. However, that’s not all. The Windows 10 can’t connect to this network often due to defective or faulty Network Adaptor or even due to improper configuration of the IP Network Settings. Additionally, another major cause of the glitch is defective or damaged Network Drivers.

So, it is quite evident that such network issues stem up from much internal hardware or software related issues as also unprecedented System Conflicts. Nonetheless, whatever may be the cause, such network issues are undeniably most unwelcoming and also quite detrimental for your System. Furthermore, such an issue disrupts User-experience to a major extent. Thus, there cannot be any dispute to the fact that such technical hitches must be curbed from the root.

Easy And Effective Hacks To Fix “Windows 10 Can’t Connect To This Network” in Minutes

So in this section, we are going to offer you a comprehensive guideline on the most workable workarounds that you must take recourse to on confronting the hitch. Therefore, without any further ado let’s begin.

Solution 1: Reinstallation of the Network Adaptor

As mentioned already, one of the fundamental causes behind “can’t connect to this network Windows 10” issue is defective or damaged Network Adaptor. Faulty Network Adapters generates accurate network issues, hindering the connection of your Windows 10 OS with the internet. However, worry not, this problem can be resolved in no time. All you need to to do is uninstall the faulty adaptor of your’s and reinstall a new one in its place. Follow the guidelines below to execute the reinstallation process:

  • First and foremost, you will have to click on the Windows Key as well as the X key simultaneously from your Keyboard
  • Thereafter, you will have to select the Device Manager form the resultant menubar that pops up.
  • Once into the Device Manager Window, navigate over to the Settings tab. From there reach out to the Network Adaptor option.
  • Once done, you must right-click on the Network Adaptor Settings Icon and press on the Uninstall option.
  • Thereafter, click on the OK  button.
  • After you have successfully uninstalled the Network Adaptor, reboot your Windows 10 Computer and reinstall the Adoptor afresh automatically as and when your System directs to. Thereafter, press on the Ok button to confirm your action.

Solution 2: Try Deactivating IPv6  

The “windows 10 can’t connect to this network” issue also generates due to incorrect configuration of your IP Network Settings. Therefore, one of the easiest fixes of the problem is to deactivate the IPv6 Network Protocols. To do so, follow the step-wise guide listed below.

  • Right at the beginning, you must initialize the “Network and Sharing Center”.
  • Once into it, you should locate and reach out to the Connection Section. Under the Connection section, you must press on the current connection of yours.
  • The moment you click on your Connection Icon, the Connection Status Window will get launched instantly.
  • Thereafter, press on Properties Icon and search out for the Internet Protocol Version 6.
  • On tracing out the option, you must make sure that you uncheck it.  
  • After unchecking it, you will have to deactivate the IPv6 Network Protocol.
  • On successful execution of the entire process, you will simply have o reboot your computer afresh.
  • Now, the “Windows 10 cannot connect to this network” should not trigger any further. However in case the issue still persists, don’t get dejected. We have still better solutions for you.

Solution 3: Try Updating the Network Adapter Driver

At times, the Windows 10 OS can’t connect to this network”  owing to an outdated Network Adaptor Driver. Therefore, to resolve such issues, you will have to make sure that you update Network Adapter to the newest version that is available. In this regard, if you are not that tech-savvy, and not quite familiar to the technical know-how, you can consider using various Adapter Utility tools. However, its always better to opt for manual updating. And you can easily opt for a manual update of your Network Adapter Driver manually. Cited below are the instructions to adhere to

  • First and foremost, you need o to click on the Windows Key+ X  key Simultaneously on your Keyboard in order t to initialize the Power Menu bar.
  • Once you launch the Power Menu, locate and Choose the Device Manager Icon.
  • Following this, move over to the Network Adapter Section. Now under this section, you should be able to Locate your adapter.
  • Once found, choose your Network Adapter’s Name. Once selected, right-click on it  and choose the Update Driver Software thereafter
  • Finally, on successful completion of all the steps mentioned above, you should press on the option entitled “Search automatically for updated driver software”

Solution 4: Try Reconnecting Your Wireless Network Anew

We understand that the problem of Windows 10 can’t connect to this network keeps recurring back again and again. In case you find the technical glitch under question too stubborn and no other troubleshooting mechanism comes to your rescue, you can simply let go of your previous Wireless Connector and reconnect the same to a fresh and functional Network Registry instead. This has, in fact, proved a fire-sure strategy and can easily rid you of your problems. Stated below are the simple steps for you  to perform

  • To begin with, initialize the Settings Tab and visit the Network & Internet. Icon.
  • Thereafter, navigate over to the WiFi Section. Under this section, you shall find the option entitled  Manage Wi-Fi settings.
  • Once found  press on the option and  drop down to the option entitled “ Manage known networks”
  • Following this, you must choose the Wireless Network you wish to use. Once you selected press on the Forget icon.
  • And last but not  least, on successful accomplishment of  all the steps cited above, connect your Windows 10 back to  your wireless network all over again

Solution 5: Make Use of a Network Adapter availing the Same  Security Type

Some wireless connections come with certain data-protection security types such as WPA-PSK. And at times you need to avail such Security Types in order to ensure the stability of the  Network connection. Precisely, you must ensure that your router device, as well as your computer device, is configured to the same Security Type. And, in order to do the same, you need to adhere to the instructions that follow.

  • First and foremost, you need to initialize the “Network and Sharing Center”
  • Thereafter, you must press on the option named  “Manage wireless networks”. Under this section, you need to search out for the Wireless Network. Once you locate it right click on the option and then select Properties.
  • Following this, you need to navigate over to the Security Tab. Once into the tab, you should search out for the Security Tab Section.
  • On completion of the above-mentioned step, you need to choose the Security Type to which the router is tailored.
  • Make sure that you pick the right Security Type for your Windows 10 Computer.
  • Thereafter, press on the OK button in order to save the changes you made.

To Round Things Up

With this, its time for us to part with you. However, before we wind up, here’s a  small piece of advice for all our readers. It is quite evident from our discussion that if the Windows 10 OS states that it can’t connect to this network, it is going to land you into serious problems, Therefore, it is imperative that you take recourse to appropriate measures to curb the glitch without jumping into conclusion arbitrarily.

It is in this regard that the solutions we offered will prove beneficial to you. The feasible workarounds we recommended are proven and indeed most effective. Therefore, you can easily resolve the technical under question by applying them. So don’t linger on with your problem further. Rather, try out the solutions we prescribed and rid yourself of the glitch once and for all.