Windows error code 0X80300024 is one of a number of several error codes that you can encounter on your Windows while you are trying to install or reinstall the Operating System. This issue manifests itself on a recently formatted hard drive with the following error message that says “Unable to Install Windows in selected location”. This error code 0X80300024 is one of the most annoying errors that usually crash the hard drive on your system which results in you can’t access the further files in your drive. So, if you are one of that hopeless user and in want of a permanent solution to eliminate this error code, then we have enough solutions to deal with this error. In this content, we will explore all the probable causes and effective solutions to resolve this error as soon as possible.

Probable Causes for Windows Error Code 0X80300024

If you are a victim of Windows error code 0X80300024, then there might be several reasons behind this error. If your hard drive is running through out-of-disk space, then it will result in error code 0X80300024 on your system. Sometimes, a faulty hard drive or a corrupted hard drive cause this annoying error as well. An error within the application driver and the hard disk will also prompt this error code 0X80300024. If anyhow, the media installation is damaged, then it will result in this error. However, you can easily eliminate this error by implementing some of the effective methods that we will explore in the next segment.

Methods to Fix Windows Error Code 0X80300024

We have arranged a few possible methods to eliminate error 0X80300024 on your Windows. You can attempt either one of these solutions or all the methods until it will improve your possibilities of successfully rectifying this issue.

Method 1: Check your PC’s Health Using Performance Monitor

This is the most initial method to check the errors on your PC using the Performance Monitor on Windows. The in-built feature allows the computer to detect all the errors and fix them automatically. Hence, go through the steps below in order to accomplish the task.

1. To get started, turn on your computer and press the Windows+R key at the same time on your keyboard to open the Run command box.
2. Type “perform” in the Run input and tap the Enter key or simply click on the OK button to proceed next.
3. After that, the Performance monitor will open where the reports are split into Diagnostic and Performance. You need to generate all that and from the left pane, expand the Data Collector Sets option.
4. Navigate to the System option and double-click the both System Diagnostics and System Performances.
5. After the process completes, find the reports from the left pane on the screen by expanding the System button.
6. At last, select all the affected files and right-click the option to choose Remove.

After successfully completing all the above steps, restart the computer and check if the error code is resolved. If still, you are facing a problem or if the above method doesn’t work, try another solution below.

Method 2: Free Up the Unnecessary Files on your PC

If your hard drive is compacted with files and data and has no memory left, then it will sometimes cause this error on your system. Hence, you need to go through the steps below to free up the disk space to eliminate this error.

1. To perform this process, turn on your computer and right-click the drive that you desire to wash up space.
2. Now, select the Properties option at the bottom of the list and select the Disk Cleanup option.
3. Identify the files by ticking the box next to the names that you will most likely to delete.
4. Later you have chosen all the files that you desire to delete, select OK to delete the Unnecessary Files.
5. When a confirmation window appears on the screen, select the Yes option at the bottom of the window.
6. After that, navigate to the More Options tab under the System Restore option and select the Clean Up option to confirm the process.
7. At last, click on Clean Up option and then click on Confirm to complete the Disk Clean Up process on your Windows.

After successfully completing all the above steps, restart the computer and check if the error code is resolved. If still, the error exists, don’t worry we have enough solution that you can follow on the next method.

Method 3: Make Assured the Effected Drive is at the Head of the Windows Boot Sequence

Sometimes if the hard drive you are trying to install the Windows Operating System on is not at the top of the boot sequence which will result in error code 0X80300024. You need to set that back in a positive way to eliminate this error. Follow the steps below in order to accomplish the task.

1. At first, when the computer starts with a starting logo, press any specific key to enter the Boot Screen.
2. Now, again press any key to enter the BIOS/Setup on your computer and locate the Boot Order/Configuration in the BIOS menu.
3. Modify the Boot direction you are seeking to install the Windows is at the very top and simply Save the settings.
4. Exit all the program normally and close all the Tabs after saving all the changes you made.

After successfully completing all the above steps, restart your computer and check if the error code is resolved. If still, you are not satisfied with this method or if the error still persists, try another solution method below.

Method 4: Format the Installation Location on your Windows

If the partition is not created well on your hard drive or if been in use before, then it will surely prevent the hard drive to access the further files on your system. You need to format the installation location in order to eliminate this error. Follow the steps below to resolve the error code 0X80300024.

1. At first, turn on your computer and insert the Windows media Installation CD into the CD-Drive and Restart the computer.
2. Select the Boot sequence from the Installation media when the computer’s logo appears on the screen.
3. Select the Language, keyboard layout and other preferences and configure it manually on the boot sequence.
4. Now, click on Custom when the computer prompted you what type of Windows Installation you desire.
5. After that, when the computer asked where you want to install the Windows OS, click on the Drive (Advanced) option and follow the on-screen instructions.
6. Now, click on the Partition option to install the Windows and then click on Format to complete the process.
7. At last, Confirm the action and wait until the drive partition to be completely formatted.

After successfully completing all the above steps, restart the computer and check if the windows error 0X80300024 is resolved. If still, the error persists and the above method doesn’t work, try another solution below.

Method 5: Wipe the Hard Drive Completely on your Windows

If none of the above methods worked, then this method is the last hope that you can try to wipe the hard drive completely on your Windows. Erasing the hard drive completely sometimes helps to solve several error codes regarding hard drive. Follow the steps below in order to accomplish the task.

1. At first, turn on your computer and tap the Windows start button the left-bottom corner of the window.
2. Select the Settings option from the menu and when a new window appears on the screen, click on Update and Security option.
3. Now, select the Recovery option from the list that appears and click on Started option below the Reset this PC option.
4. Select the Remove Everything option from the list and select Remove Files and Clean the Drive option at the very bottom of the list.
5. Click on Next and then on Confirm option to complete the process on your system.

After successfully completing all the above steps, we hope you are no longer affected by this error code on your computer.

Conclusion

Error code 0X80300024 is one of the most critical error codes that directly affects the hard drive on your computer. We have shared all the possible methods in order to resolve this error code on your Windows. You can go through either one of this method or all the methods until you have the problem settled. We hope the above article was beneficial enough to assist you on how to fix error 0x80300024. In case, the error still persists, then there might be some other internal glitches or the hard drive goes corrupted. In that case, you can replace the hard drive to a newer one. You can also consult with an expert or take technical help for further assistance. Lastly, we recommend you to drop your valuable feedback below in the comment segment to let us know about your experience.