Fix Windows 10 Error Code 80240031 Quickly With Some Exclusive Ways

The Upgrade operation in Windows is necessary to enhance the system longevity. Without performing the upgrade program, you can’t enjoy the latest technology on your system. On the other hand, you can encounter the Windows 10 update error if any fault occurs. Therefore, you can get stuck with the unexpected error message, “Windows 10 Error Code 80240031” at any time. Thus, if you fail to upgrade the software, then this error message will pop up. Moreover, the device starts to lag automatically and stops to respond after a certain time. However, we are going to discuss the steps to overcome the problem in this article.

Significant Issues Behind Windows 10 Update Error 80240031:

Lots of technical issues become critical while you are trying to perform to Windows 10 update program. So, if you can identify it at the very initial stage, then it will be better to resolve quickly.


  1. System File corruption causes the Windows 10 update error efficiently.
  2. Full of Store Cache is one of the main reasons responsible for generating the Windows 10 error code 80240031.
  3. Obsolete version of the apps sometimes fails to accept the Windows 10 update program on your device due to the OS incompatibility.
  4. Firewall protection becomes a barrier in running the Windows 10 update error.

Resolve the Windows 10 Error Code 80240031 with a Few Technical Solutions:

There are some of the simple technical ways to fix the Windows 10 error code 80240031 without any hassle. Moreover, it can help to enhance the performance of the system. So, you might try out the steps below to overcome this annoying issue very effectively.

Method 1: Run System File Checker

  1. Click on the Windows icon from the bottom left corner of the desktop and open the Start menu.
  2. Now, type “cmd” in the Cortana Search box to locate the Command Prompt option from that list.
  3. Right-click on that option and choose Run as Administrator from the pop-up menu appeared on the screen.
  4. Enter the correct username and passcode to log in the account.
  5. Next, type “sfc/scannow” in the Command Prompt window and run it by pressing the Enter key fro the keyboard.
  6. It will start to run automatically and identify the corrupted system files of your device. Moreover, it will start to repair the files accordingly.
  7. Wait until the entire process is finished and when done, try to reboot the device. Now, you can verify whether the Windows 10 error code 80240031 persists or not.

Method 2: Refresh the PC

  1. Choose the Settings (gear icon) from the Start menu which appears on the screen.
  2. Next, click on the Advanced Startup menu from the list and hit the Restart Now button.
  3. After that, click on the Troubleshoot option from the list of Restart methods.
  4. Now, click on Refresh and perform the Windows refresh operation.
  5. It will reboot the device in Normal mode and checks whether the code 80240031 Windows 10 problem got fixed or not.

Method 3: Clear App Store Cache

  1. Press the Windows keyword and R from the keyboard together to launch the Run dialog box.
  2. Type “wsreset.exe” in the Run text box and execute the installation file by pressing the Enter key or tap the OK button.
  3. After that, it will start to run and remove all the installed apps from the App Store cache quickly.
  4. When done, try to perform the app upgrade process and check whether the same issue occurs or not.

Method 4: Restart the System in Clean Boot Mode

  1. Type “misconfig” in the search box and open the Configuration window by pressing the Enter key from the keyboard.
  2. After that, choose the System Configuration option from this section. Now, click on the Service button from the System Configuration dialog box.
  3. Next, click the Hide All Microsoft Services option and hit the Disable All to turn the service off.
  4. Now, press the Startup button from that same page and select the Open Task Manager tab from the Startup window.
  5. You will get a list of enabled items under the Task Manager window and disable them one after another.
  6. Close the Task Manager window and click the OK  button to complete the entire process.
  7. When done, restart the device and save all the new recent changes. This process will help you to fix the Windows 10 upgrade error 80240031.


Method 5: Disable Graphics Card Drivers

  1. Click on the Start menu and select the Run option from the Start menu.
  2. Now, type the “devicemngr” in the search box and launch the Device Manager window by hitting the Enter key or by clicking the OK button.
  3. A list of installed hardware devices with their sub-divisions will be shown in that window.
  4. Go to the Display Adapter option from that window and expand it.
  5. Next, choose the Graphics Card from the list of devices under this section. Right-click on it and select Properties from the pop-up appeared on the screen.
  6. Then, click on the Drivers tab from the Properties window.
  7. Here, you need to check the drivers status and turn it off by tapping the Disable button.
  8. Finally, confirm the Graphics Card removal process by pressing the Enter or clicking the OK button.
  9. Wait until the successful message is shown on the screen. When done, reboot the device.
  10. After restarting Windows 10, you might verify whether the Windows 10 upgrade error 80240031 appears at the time of system update.

Method 6: Uninstall the Antivirus Software

  1. Type “control” in the Cortana search box and open the Control Panel window by choosing its specific icon from the Start menu.
  2. After that, click on the Programs & Features from the several programs.
  3. Choose the option “Uninstall a Program” under this section.
  4. Now, select the Antivirus Software from the list of installed application software. Moreover, choose other files associated with it.
  5. Right-click on them and hit the Uninstall button one after another. Then, confirm it by tapping the Yes button from the Uninstallation Confirmation dialog box.
  6. After getting a confirmation, it will start to remove the antivirus program and its related other installer files.
  7. When done, it will show you a successful message, “Antivirus is successfully uninstalled from your device”.

Method 7: Turn Off Firewall

  1. Click on the Windows icon from the left corner of the taskbar and launch the Start menu on the screen.
  2. Type “firewall” in the search box and open it by clicking on the OK button.
  3. Now, check the Firewall Status from the left panel of the window.
  4. After that, tap on the Yes button to verify the User’s Account when the User Account warning message appears on the screen.
  5. Next, move the slider to the OFF position and disable the Windows Firewall option for both the Private and Public Network Settings.
  6. Then, click on the OK button and confirm the disable process of the Windows Firewall.
  7. Finally, check whether the Windows 10 error code 80240031appers on the screen or not, at the time of the upgrade process.

Method 8: Perform Auto-Repair

  1. Press the Windows key from the keyboard and choose the Settings app from the Start menu.
  2. After that, choose the Advanced Startup and confirm it by hitting the Enter button.
  3. From the Advanced Setup window, select the Advanced Startup menu by scrolling down.
  4. Next, click on the Restart Now button and let it reboot successfully.
  5. Now, choose the Troubleshoot option from several System Startup options.
  6. Next, go to the Advanced Options and click on the Automatic Repair from the resultant window.
  7. It will locate the corrupted files that are harmful to your device and repair them respectively.
  8. The System will restart automatically once the Windows file repair process is done.

Method 9: Scan for Upgrades

  1. Press the Windows key from the keyboard and click on the Settings.
  2. Next, click on the Update & Security option from a list of programs appeared on the Settings window.
  3. After that, go to the Update section from the next window.
  4. Click on the Check for Updates option from that same window. It will show the status of the installed apps.
  5. If an update is available, it will display the latest version for previously installed applications separately.
  6. Click on the Update button and complete the Update process, if necessary. The total processing time depends on the number of updating software.
  7. When done, it will show a successful message against the app update process and restart the device as soon as possible. Now, verify whether the Windows 10 error code 80240031 still persists or not.

Bottom Line

In this content, we have discussed the effective steps to resolve the Windows 10 error code 80240031 efficiently. Moreover, we have defined the significant issues for this annoying issue. So, hope this article will help you to avoid as well as resolve the Windows 10 upgrade issue quickly.