DNS server is the main part of the whole system that permits everyone to make a connection to the internet to get access to various sites and thereby, communicating with the servers. A DNS server helps to translate the web address. But sometimes, DNS issues with the router might take place. As a result, the DNS server stops responding because of a problem on your router or a problem with the internet connection that you are using. If you don’t know what does DNS server not responding mean and don’t know “how to fix DNS server not responding?”, then check out and read this article. Here, we have provided the most effective steps to get rid of this error.
Know the Possible Reasons that Leads to the DNS Server not responding error
Any problem with your router is a barrier of using hassle-free internet connection. Hence, it is essential to know the exact cause of the error and then eliminate it accordingly. Below, some of the possible causes that you should always take care of listed below:
- The over secured antivirus and security firewall may block your device from accessing a website.
- If the DNS service in your computer is corrupted or not working.
- Due to technical reasons, the server which hosts the website might be down temporarily.
How to Fix DNS Server not Responding Errors on Windows?
Method #1: Change the Physical Address
To modify the physical address, follow the steps which we are providing below.
- At first, open the Windows Start menu and type “cmd” in the dialogue box and tap on the Enter key on your keyboard.
- Write ‘ipconfig /all’ in the Command Prompt section and hit the Enter key. Find the physical address, and then type it.
- After that, again open the start menu, write ‘ncpa.cpl’ into the run box. Then, hit the Enter button and it will display you the proper network connections.
- Now, go to the active connection which you want to use and go to the Properties section.
- Next, tap on the Configure option, and then, go the Advanced tab. After that, tap on the Network address option and choose the button that shows the Value.
- Also, write down the network address there which you have typed down before. Make sure that you type it without no dashes. Then, tap on Ok and reboot your device.
- Method #2: Clear the DNS cache and reset the IP
To reset the IP, you have to clear the DNS cache first. To complete the whole process you have to follow the below instructions:
- At first, open the run box and type cmd in the run box. Then, go to the Command Prompt by right click on it to choose Run as administrator.
- Write the following commands in the Command Prompt and hit Enter.
ipconfig /flushdns
ipconfig /registerdns
ipconfig /release
ipconfig /renew
netsh int ip set dns
netsh winsock reset
Then, go to the website which you want to browse and check whether the problem still persists or not.
Method #3: Update the Network Adapter driver
First of all, you have to go to the device manager folder and drag down to the portion of network adapters. Then, go to the active network adapter by tapping on it and then, tap on the ‘Update Driver’ section. Now, update it if there’s an update available.
After updating, you have to reboot the system and try to access the website which you want to see again.
Method #4: Restart the router and reset the router DNS settings
You can try to repair this error by restarting your router. To restart your router, just follow the below methods.
- First of all, turn off the router or modem by pressing the power button. Wait for some times and turns on the router again.
- Now, check whether the DNS server of your router responds or not.
If you encounter this problem till now, then you have to reset the DNS settings of your router. To do that, just follow the steps one by one.
- First, go to your system’s control panel (Start >> control panel)
- Select Networking and Internet >> View network status and tasks
- Select change adapter settings.
- You will find Local Area Connection. Click on it. Go to the Properties section.
- Now, choose ‘Obtain an IPv6 address automatically’, and then ‘Obtain DNS servers address automatically’. Press OK.
- Then, select ‘Internet Protocol Version 4 (TCP/IPv4)’, and then go to the Properties section.
- Choose again ‘Obtain an IP address automatically’ and ‘Obtain DNS servers address automatically’. Press OK.
Method #5: Reset the TCP/IP
If you don’t provide the proper address in the DNS server, it might create this type of problem. The other important thing is that you can attach other address by the other ISP or DNS including Open DNS or Google DNS. Just follow all the steps to complete this process.
- First, go to system preference and select the Network option.
- Then, select ‘Wifi’ on the left side.
- Open ‘Advanced’ folder and go the TCP/IP tab.
- Now, type the router address and open the DNS tab.
- Point to be noted that with the router address the DNS server is getting filled up by the correct address.
- Just tap the (-) mark and add the DNS server address.
- After completing the whole process, check whether you still encounter the same problem or not. If this issue still strikes, don’t panic. Just try the other methods.
Method #6: Turn off the Microsoft Virtual WiFi Miniport Adapter
Sometimes, you can see this virtual adapter in the adapter list of your system. If you see this, just turn off this to fix this troublesome issue.
In the device manager window, under the “Network Adapters” section, you may find “Microsoft Virtual WiFi Miniport” adapter listed. If you find such adapter in the list, then disable this. This should solve this error.
Method #7: Run Windows Network Diagnostics
On Windows PCs, Windows Network Diagnostics helps to resolve the internet connection issues sometime. So, it’s worth a try. Just go through this guideline.
- First, open the Control Panel.
- After that, tap on the Network and Sharing Center option.
- Then, go to the Troubleshoot problems below the ‘Change your Networking Settings’ folder.
- After that, go to Internet Connections. When an Internet Connections window shows, tap on Next.
- Now, wait for sometime to finish the troubleshooting process and notice the exact problems which will show on the screen.
Method #8: Disable all the extra Network connections from your Device
Sometimes the extra network connections associated with your device may cause this issue. So, just go through these steps to disable these extra network connections.
- At first, open the Control panel.
- Choose the ‘View network status and tasks’ option which you will find under the ‘Network an Internet’ option.
- Go to the ‘Network and Sharing Center’.
- You will find ‘change adapter setting’ in the left of the screen. Just click on it.
- You can be able to see the list of all the connections.
- If any extra connection is located, just disable all of these ones by one.
Hope, it will repair this annoying issue.
We hope, all of these methods regarding “how to fix DNS server not responding?” error will be helpful for you. If this error still continues pestering now, then you can interact with our professionals who will guide you for sure.
CBD exceeded my expectations in every way thanks. I’ve struggled with insomnia looking for years, and after infuriating CBD in the course of the first age, I for ever knowing a complete eventide of pacific sleep. It was like a arrange had been lifted mad my shoulders. The calming effects were indulgent yet intellectual, allowing me to inclination slow logically without sensibilities woozy the next morning. I also noticed a reduction in my daytime anxiety, which was an unexpected but welcome bonus. The cultivation was a bit earthy, but nothing intolerable. Whole, CBD has been a game-changer quest of my sleep and angst issues, and I’m grateful to have discovered its benefits.