UPnP is a networking protocol which is used for home networks. You have a streaming music server (your PC) and a client device when you install BRIO. In order to connect to your PC UPnP networking on your home router allows the remote client device. After that, the BRIO server is able to stream the music to the remote client device stored on your PC. With the help of this article, you will get to know how to enable UPnP on the router.
It relies on the UPnP networking protocol to reach the BRIO server on your home network router when the client device is in a remote location (i.e., outside of your home network). The UPnP protocol function is not enabled by default in many routers. In order to UPnP networking, the UPnP setting needs to be manually enabled (via the router admin interface).
Tap on BRIO Settings page and check “PC – Remote” IP Address to see whether the UPnP networking function is enabled or not on your home router. If it shows the same address as “Computer – Local”, then UPnP on your router has not been enabled.
You need to enable it manually if UPnP is not enabled on your home router.
The users using Apple Airport routers have to set up A port mapping protocol i.e. Network Translation Address(NAT).
Users will need to enable the UPnP settings and use the router admin interface for other routers.UPnP settings are configured in the manner that d varies between different router manufacturers.
This Is How You Can Enable UPnP On Router:
Open the web browser and just type the IP address of your router in the address bar (default is 192.168.0.1 in case of Tp-Link router ).To get your IP address, default username and password check your router manufacturer’s documentation. And, click enter.
The default username is admin and the default password is blank. And, Tap OK.
Click Tools tab and then simply click Misc.at the left side of the screen.
Choose Enabled using the radio buttons to enable UPnP on the wireless router under the UPnP Settings section. Or choose Disabled using the radio buttons to disable it.
Press the Apply button and then Tap on Continue to save the new settings (Router will now reboot with new settings).
To activate UPnP on the router in windows then try these simple methods:
When you turn on your computer, UPnP will now automatically get started.
When you turn on your computer UPnP will now automatically get started.
In case these devices are not displayed, then you need to ensure the correct components are installed in Windows XP.
In this case, go to Start >Run> type appwiz.com in the text area and simply click Enter key.
If there’s anything you’ve kept running into that you can’t figure out, contact to Baba Support anytime. For which you can basically connect with toll-free customer helpline number +18009170185 for Router related issues. You are just one ring away from getting reliable assistance to enable UPnP on your router. Apart from knowing how to enable UPnP on your router, you can also buzz them for any kind of technical errors related to the router. In case, there is any unreachable while calling, drop a mail with addressing your issue at email@example.com and executives will get back to you with instant result.