A bridge router is another type of network device operating as a bridge as well as a router. It has the ability to work as two different devices and manage the different data accordingly. For example, a bridge router can provide the bridging capacity as well as the routing capacity of some protocol such as a token ring. But sometimes you may encounter a situation which you might need to bridge a router. By doing this, you can use the advantages of both router and bridge. One of the many tasks that the router can perform after bridging is that it can connect two networks in a single. So in this article, we will talk about how to use a router as a bridge. Just keep reading this article and follow its instructions properly.

Methodical Steps To Bridge A Router:

Here, in this article, we discuss some of the easiest steps to bridge a router so that you can do it seamlessly on your own. Just follow the steps below one-by-one:

Step 1: Use Ethernet Cable

By using Ethernet cable, at first, connect your computer to the router. Make sure that the cable should be plugged into the LAN port.

Step 2: Configuration of the Router

Then, follow the instructions to log in and configure the router manually through the configuration application. You can do this by giving the IP address of the router into the address bar of the Web browser. After that, enter the username and password of the router. In the Windows browser, you will see the main configuration page. Now, with the help of assortment link, you can customize how the router will operate.

Step 3: Locating the IP Address

Locate the page which allows you to set the IP address of the router. You can set it as default address of the router. But then, you have to sure that it must be the same as other device networks.

Step 4: Settings for DHCP And DSN

Find the settings for DHCP and DSN servers which is in-built in the router. After that, you need to disable both servers. This is because the main router on the network will process the IP address and translate the network address.

Step 5: Disable the Firewalls

After you have disabled the servers, now you need to disable all the access controls and the firewalls of the router to use it as a bridge. The main router has to perform these tasks accordingly. After completing the task, enable all the access controls and firewalls.

Step 6: Remove the Entries

In the port forwarding section of the router, try to remove all the entries. These settings are designed to allow certain applications to easily access the specific ports on the internet which are not necessary.  

Step 7: Save the Settings

After that, save all the Settings that you have done to bridge a router so that it can take an effect. With all the routing and bridging features, now your router is customized to act as a bridge on your network.

Know How to Setup Your Linksys Router to Linksys Bridge Mode:

In this content, we will show you how to use a router as a bridge. You can also set up your router in bridge mode. To do it, just perform the steps provided below:

• Enter the username and password of the router
• After that, click on the Advance option
• Then, go to the Advance setup option
• After that, click on the Bridge option to display the bridge configuration page
• Then, click on the Setup Bridge mode button
• After that, enter the Settings of the router
  • Select the wireless network frequency
  • In the SSID field, enter the network name
  • In the security section, select the wifi security mode of the router
  • After that, type the wifi password and click on the Apply button
• Go to the advance window settings page, click on the Apply button.

Once you are done with setting up your router to bridge mode, it will be saved automatically.

Hope that by reading out the above article, it will give you a brief idea of how to use a router as a bridge effectively. If you don’t find this article helpful enough or if you have any queries, then you can come in contact with an experienced technician to get the most appropriate solutions for it.