Effective Ways to Solve No Valid IP Configuration

Nowadays, most of the people try to access the internet connection via WiFi. But very often it is found that when the users are trying to access the internet via Wifi connectivity, they are encountering errors like no valid IP configuration error. This issue might appear anytime in your device without giving any pre-warning messages. Most of the users encounter this error message when they try to fix their network. On the other hand,  while some users see this message when they try to log in to their system. Mainly, the problem occurs in Windows 10 device, when any new update gets installed in it. If you are coming across this error, then unhesitatingly go through the instructions provided in this article to overcome this error.

Fixing the error would be a lot easier if you know what are the causes which led to this error. So, follow the whole guide carefully and troubleshoot this annoying problem without any hassle.

Prime Reasons Behind WiFi Does Not Have a Valid IP Configuration:

The problem can occur due to several reasons. It can arise if the system does not get the IP address. Furthermore, if your connection gets blocked because of a driver problem or virus attack, then also you might come across this error.

Therefore, these are the various reasons responsible for this frustrating error message. However, no need to worry if you do not have any idea how to fix wifi doesn’t have a valid ip configuration. Hence, keep reading this article to get solutions through which you can easily get rid of this error.

Step-by-Step Guidance to Fix No Valid IP Configuration Error:

We are mentioning some of the convenient solutions to get rid of this annoying problem in no time.

Procedure 1: Release and Renew IP Address

As we have mentioned earlier that the problem can arise due to the problematic network. Follow the steps mentioned in the below section to solve this error with particularly this method:

  1. Open the Command Prompt box as an Administrator.
  2. In the Command Prompt box, type ipconfig/release and press the Enter button.
  3. After that, type ipconfig/renew in the command box and hit the Enter button.
  4. At last, type Exit and then press the Enter button.

Procedure 2: Reset TCP/IP

To reset the TCP/IP setting of your system follow the under mentioned section:

  • Launch the Command Prompt as an Administrator option.
  • In the command section, type netsh Winsock reset and then press the Enter button.
  • After that, type netsh int ip reset in the command box and hit the Enter button.
  • Then, restart your system and check the status of the error.

If the problem still persists, then make sure that the Wired Autoconfig service and the WLAN autoconfig service are running normally. To perform the steps, follow the below section.

  • To open the Run box, type Win key + R using keyboard.
  • In the Run box, type services.msc and then press Ok button.
  • A list of the name will appear. Choose Wired Autoconfig option from the list and double-click on it to open the Properties option.
  • Make sure that Startup type is Automatic and the Service status is running properly. After changing the Settings option, hit the Apply button.
  • After that, double-click on the WLAN AutoConfig option.
  • Ensure that the Startup type is Automatic and it’s running normally.

Therefore, check if the error gets resolved. If not, move on to the next step.

Procedure 3: Uninstall Wireless Adapter Driver

A faulty network driver might also be responsible for the no valid IP configuration error. Then, you need to uninstall the wireless adapter and reinstall it on your system.

Follow the steps in order to uninstall the driver.

Step 1

At first, head to the Device Manager option. Then, find the Network adapter option and right-click on it. After that, choose the Uninstall option from the list.

Step 2

To confirm the uninstallation process, click Ok option. If you see a message displaying ‘Delete the driver software for this device’ which appears in the bottom of your system’s corner. Then, click on the checkbox before pressing the Ok button to proceed further.

Step 3

After that, restart your system and check whether the problem still there or not.

Procedure 4: Update the Driver

An outdated Windows driver can also cause this error message. So, in order to fix the error update the Windows driver accordingly. To update the Windows driver, perform the below actions:

  1. Go to the Control Panel option and then, navigate to the System and Security option.
  2. After that, head to the System option.
  3. Click the System option and a new window will open.
  4. In the bottom left corner, you will find the Windows Update option.
  5. Check any update available for the Windows driver. If yes, then update the drivers accordingly and restart the system with the fresh Windows driver.

Procedure 5: Manually set IP Address

If you above mentioned methods does not help you to resolve the issue, then try to set the IP address by yourself.  Follow the below instructions to reset the IP address manually,

Step 1

Open the Control Panel option and select the Network and Sharing option.

Step 2

After that, click Change adapter settings which are placed in the left panel.

Step 3

Further, right-click the WiFi connection and select the Properties option. Then, choose Internet Protocol Version 4(TCP/IPv4) and double-click on the Properties option.

Step 4

Then, set your IP address which starts with 192.168.X.X in place of X you choose any digit. After you have set a unique IP address of your system, click Ok button to confirm it.

Hope, this article proves quite helpful for you to resolve no valid IP configuration problem. Go through all the steps carefully and perform them accordingly. If you face any further issue, then look for professional assistance to eliminate this error as early as possible.

Leave a Reply

Your email address will not be published. Required fields are marked *